LOADING IMAGES

Ceramic Cylinder Liners For Reciprocating Pumps

Due to the ceramic's resistance to pressure, heat, abrasion, and corrosion., UNIPRETEC uses ceramics instead of SUS to make cylinder liners for reciprocating pumps. We are specialized in making ceramic cylinder liners that meet customers' needs in terms of roundness, straightness, surface roughness, etc., and improving work efficiency, product lifetime, and precision.

Material
: Al2O3 / Si3N4 / ZrO2
Color
: Ivory / Black / White
Density
: 3.90 / 3.20 / 6.00 g/cm3
Thermal Conductivity
Max. Service Temperature
Typical Advantages

Inquiry now

Product Detail

▼ Introduction of Cylinder Liners For Reciprocating Pumps

The cylinder walls of reciprocating pumps used in upstream surface production processes are exposed to environment of high wear, heat, pressure, and corrosive fluids with solids. Within the cylinder, cylinder liners protect the walls from these extreme circumstances while also providing a sliding surface to enhance functioning.

The extreme circumstances that the cylinder walls must withstand are resisted by ceramic cylinder liners for reciprocating pumps. Unipretec may supply ceramic cylinder liners either alone or as part of a ceramic-metal subassembly. Unipretec ceramic-metal subassemblies are built to our clients' specifications and employ heat shrink technology to attach and support a ceramic cylinder within a metal sleeve. Using Unipretec's advanced ceramic cylinder liners will increase equipment life, save total operating costs, and decrease non-productive time.

√ Never Rust	√ Long Service Life	√ Chemical Inertness
√ Low Thermal Expansion	√ High Working Temperature	√ High Hardness (Mohs 8.0-9.0)

▼ Material Properties of Cylinder Liners For Reciprocating Pumps

Material Properties of Ceramic Plungers

Related Tags :

Next:
Zirconia Ceramic Plungers for Waterjet Intensifier

Request a free quote

If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!

Categories

Hot Products

Ceramic Cylinder Liners For Reciprocating Pumps

Due to the ceramic's resistance to pressure, heat, abrasion, and corrosion., UNIPRETEC uses ceramics instead of SUS to make cylinder liners for reciprocating pumps. We are specialized in making ceramic cylinder liners that meet customers' needs in terms of roundness, straightness, surface roughness, etc., and improving work efficiency, product lifetime, and precision.
Zro2 Zirconia Gap Sub Washers

Zirconium dioxide, also known as zirconia and zirconium oxide, is a crystalline metal oxide that has found its way into the technical advanced ceramics industry. It is characterised by its high thermal resistivity, mechanical resistance, and abrasive properties.
Zirconia Ceramic Plungers for Waterjet Intensifier

Due to the ceramic's resistance to chemicals, heat, abrasion, and its low thermal expansion, etc., UNIPRETEC uses zirconia ceramic instead of SUS to make the plungers (pistons) for high pressure waterjet pump intensifier parts. We are specialized in making ceramic plungers that meet customers' needs in terms of roundness, straightness, surface roughness, etc., and improving work efficiency, product lifetime, and precision.
Ceramic Plungers for Pump

Due to the ceramic's resistance to chemicals, heat, abrasion, and its low thermal expansion, etc., UNIPRETEC uses ceramics instead of SUS to make plungers (pistons) for high pressure plunger pumps, automatic filling machines, medical controlled volume pumps, syringe pumps, etc. We are specialized in making ceramic plungers that meet customers' needs in terms of roundness, straightness, surface roughness, etc., and improving work efficiency, product lifetime, and precision.
$zirconia frac plug button$

ZrO2 Zirconia Ceramic Frac Plug Buttons

Zirconium dioxide, also known as zirconia and zirconium oxide, is a crystalline metal oxide that has found its way into the technical advanced ceramics industry. It is characterised by its high thermal resistivity, mechanical resistance, and abrasive properties.
Alumina Ceramic Piston for High Pressure Washer Pump

The ceramic pistons are made using the advanced aluminum oxide ceramic material that possesses high hardness, wear resistance, high temperature resistance, and corrosion resistance, ensuring consistent material performance.

Related products

Macor Grade Machinable Glass Ceramic Rod Sheet Bar Plate

Macor Grade Machinable Glass Ceramic from UNIPRETEC is an outstanding engineering material and is machinable with ordinary metalworking tools. It is also a problem solving material combining the performance of a technical ceramic with the versatility of a high performance plastic.

Al2O3 Si3N4 ZrO2 Ceramic Rollers for Laboratory Triple Three Roll Mill

UNIPRETEC provides ceramic rollers for laboratory three-roll grinders. UNIPRETEC's rollers are made of special ceramic materials, including high-purity alumina, zirconia and silicon nitride.

Ceramic Plungers for Pump

Due to the ceramic's resistance to chemicals, heat, abrasion, and its low thermal expansion, etc., UNIPRETEC uses ceramics instead of SUS to make plungers (pistons) for high pressure plunger pumps, automatic filling machines, medical controlled volume pumps, syringe pumps, etc. We are specialized in making ceramic plungers that meet customers' needs in terms of roundness, straightness, surface roughness, etc., and improving work efficiency, product lifetime, and precision.

Zirconia Ceramic Plungers for Waterjet Intensifier

Due to the ceramic's resistance to chemicals, heat, abrasion, and its low thermal expansion, etc., UNIPRETEC uses zirconia ceramic instead of SUS to make the plungers (pistons) for high pressure waterjet pump intensifier parts. We are specialized in making ceramic plungers that meet customers' needs in terms of roundness, straightness, surface roughness, etc., and improving work efficiency, product lifetime, and precision.

Electrical Insulating Alumina Ceramic Sleeve Washer

Alumina Ceramic is the material used in a wide variety of industrial and engineering applications for its high performance and purity. Alumina oxide is chosen for its strength, stiffness, and resistance to corrosion, as well as its electrical insulation and high thermal conductivity.

Hexagonal Boron Nitride Ceramic Rod

BN Boron Nitride is made by hot pressing at high temperature and pressure. It can easily be machined into custom shapes. The unique combination of highly exceptional thermal, physical and chemical properties of BN makes it ideal for solving tough challenges in various industrial applications.

GPSN Si3N4 Silicon Nitride Ceramic Rings

The unique combination of material properties of Silicon Nitride makes it ideal for applications with high dynamic stresses, thermal rigor, and demanding reliability requirements, meanwhile, it provides advantages in severe-service applications such as turbines and high-end ball bearings.

ZrO2 Zirconia Ceramic Blades for Empty Hard Gelatin Capsules Trimming

Material Yttria Stabilized Zirconia(Y2O3-ZrO2) is used to make the Ceramic Capsule Blade. Under proper working conditions, service life of Ceramic Blades for Trimming Empty Capsules is much longer than metal blades.

our Partners

UNIPRETEC is founded in 2011 and located in Xiamen, China. We produce customized components as well as a comprehensive standard range of high-performance ceramics. Our products made of Aluminum Oxide (Al2O3) and Zirconium Oxide (ZrO2), as well as Boron Nitride (BN) and Silicon Nitride (Si3N4) are mainly used in the areas: Electrical Engineering, Mechanical Engineering and High Temperature Technology.

Get In Touch

No. 153 Yuehua Road, Huli District, Xiamen, CHINA
+86-592-5510319
info@unipretec.com
unipretec
+8618064465271

Need Help

Hot Tags

Subscribe

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

chat now

If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!

Online Service

+86-592-5510319
info@unipretec.com
unipretec
+8618064465271