• f
  • t
  • g
  • y
  • in
Technical Ceramics

LOADING IMAGES

AlN Aluminum Nitride Ceramic Insulator Manufacturer

AlN has excellent electrical insulation and high thermal conductivity, is thus considered as high performance electronic packaging material. UNIPRETEC offers a series of substrates based on AlN materials for use in application environments.
  • Material

    : Aluminum Nitride
  • Color

    : Grey
  • Density

    : 3.30 g/cm3
  • Thermal Conductivity

    : > 175 W/m.K
  • Max. Service Temperature

    : 1200 degree C
  • Typical Advantages

    : High Thermal Conductivity
Inquiry now
Product Detail

AlN(Aluminum Nitride) Ceramic has excellent thermal conductivity, is thus considered as high performance electronic packaging material. UNIPRETEC offers a series of substrates based on AlN materials for use in application environments. These materials are available in both lapped and "as fired" condition as well as metalized and non-metalized substrates.


Properties of Aluminum Nitride(AlN) Ceramic :


   Excellent in insulation properties
   Small dielectric constant
   Excellent in thermal shock resistance
   Good smoothness / flatness
   High thermal conductivity    Thermal expansion coefficient similar to silicon
   Excellent resistance against oil  /  acid /  alkali
   ...


Typical Applications of Aluminum Nitride(AlN) Ceramic :


   LED packages    Power modules
   Wafer bonding    Heat dissipation substrate
   Substrate for chip resistors    HIC substrate/plate for heat dissipation
   FAX substrates for thermal printer head    ...


Material Thermal Conductivity Performance Comparison Table :




Material Coeffecient of Expansion Performance Comparison Table :


Request a free quote

If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!

Hot Products
  • Ceramic Welding Roll

    Ceramic Si3N4 Welding Rolls for Steel Tube Industry

    silicon nitride ceramics is an inorganic non-metallic material. It is a super-hard material, which has lubricity and is wear-resistant; except for hydrofluoric acid, it does not react with other inorganic acids. It is highly corrosive and resistant to oxidation at high temperatures. Moreover, it can resist high thermal shocks. It will not crack when heated to over 1,000°C in the air, cooled rapidly and then heated rapidly. Because of the excellent characteristics of Si3N4 ceramics, it’s often used to manufacture bearings, turbine blades, mechanical seal rings, permanent molds and other mechanical components. In the field of welding of copper stainless, and aluminum tubes, silicon nitride ceramic rolls have natural advantages.

  • boron nitride setters

    Ceramic Boron Nitride Setters for Nitride Ceramics Sintering

    Boron Nitride can be compared to graphite thanks to lubrication capacities, good thermal conduction and easy machinability, although it's white and has good electrical insulation. Plus, it isn't wetted by most molten metals and can therefore be used as a container for most molten metals.

  • Alumina ceramic sintering aid for MIM

    High Purity Alumina Ceramic Sintering Aid for MIM Components

    Ceramic kiln furniture has two basic properties - firstly dimensional stability at high temperatures and secondly thermal shock resistance. UNIPRETEC is professional manufacturer of High Purity Alumina Ceramic Kiln Furniture(Trays, Setter Plates, Saggers).

  • Ceramic Rollers for Laboratory Three Roll Mill

    Al2O3 Si3N4 ZrO2 Ceramic Rollers for Laboratory Triple Three Roll Mill

    UNIPRETEC provides ceramic rollers for laboratory three-roll grinders. UNIPRETEC's rollers are made of special ceramic materials, including high-purity alumina, zirconia and silicon nitride.

  • Si3N4 Silicon Nitride Ceramic Bearing Balls UNIPRETEC

    Si3N4 Silicon Nitride Ceramic Bearing Balls

    The unique combination of material properties of Silicon Nitride makes it ideal for applications with high dynamic stresses, thermal rigor, and demanding reliability requirements, meanwhile, it provides advantages in severe-service applications such as turbines and high-end ball bearings.

  • zirconia sheet

    YSZ ZrO2 Yttria Stabilized Zirconium Oxide Zirconia Ceramic Crucible

    Zirconium dioxide, also known as zirconia and zirconium oxide, is a crystalline metal oxide that has found its way into the technical advanced ceramics industry. It is characterised by its high thermal resistivity, mechanical resistance, and abrasive properties.

Related products
Aluminum Nitride Substrates
High Thermal Conductivity AlN Aluminum Nitride Ceramic Substrate
High thermal conductivity and excellent electrical insulation are the two main properties of AlN Ceramic. Aluminum Nitride substrates are typically used in heat dissipation substrate, LED package, power module, wafer bonding, power resistor...
Alumina Ceramic Substrates
96% and 99% Al2O3 Alumina Ceramic Substrates Sheets Plates
Alumina Substrates/Sheets/Plates are made by tape casting and dry pressing. General purity degrees of Al2O3 Substrates/Sheets/Plates are 96%, 99% and 99.5%. Purity 96% Alumina Ceramic is the most choice.
alumina substrates
Al2O3 Aluminum Oxide Alumina Ceramic Substrates
Alumina Substrate has well-balanced properties of insulation, thermal conductivity and breaking strength. ... Physical and chemical properties are stable even under a hot environment. Excellent in thermal shock resistance. High thermal conductivity and coefficient of thermal expansion similar to that of silicon.
aluminum nitride substrates
AlN Aluminum Nitride Ceramic Substrates Sheets Plates
Aluminum Nitride (AlN) has excellent electrical insulation and high thermal conductivity, is thus considered as high performance electronic packaging material. UNIPRETEC offers a series of substrates based on AlN materials for use in application environments.
zirconia pin
YSZ ZrO2 Yttria Stabilized Zirconium Oxide Zirconia Ceramic Pins
Zirconium Oxide (Zirconia) is the toughest ceramic commercially available. This high-strength material with 9 Mohs' hardness exhibits excellent wear and corrosion properties. Zirconia exhibits a very low coefficient of friction and is available in MgO or Yttria stabilized grades.
zirconia plate
YSZ ZrO2 Yttria Stabilized Zirconium Oxide Zirconia Ceramic Plates
The unique structure of Zirconia Ceramic makes it one of the toughest technical ceramics available. Zirconium Oxide Ceramic is one of the best materials for demanding structural and mechanical applications, and has excellent resistance to corrosion and wear.
silicon nitride shaft
GPSN Si3N4 Silicon Nitride Ceramic Shafts
Silicon Nitride ceramic's unique properties of high strength, superior fracture toughness and excellent hardness provides a unique engineering material solution for many project's extreme environments and demanding mechanical / structural requirements.
Titanium Diboride TiB2 Ceramic Evaporation Boats for Vacuum Metallizing Web Coating UNIPRETEC
Titanium Diboride TiB2 Ceramic Evaporation Boats for Vacuum Metallizing Web Coating
Titanium boride (TiB2) is the most stable compound of boron and titanium, and belongs to the hexagonal system of metalloid compounds. Titanium diboride has a hexagonal crystal structure, gray or gray-black powder, odorless, excellent overall performance, high hardness, excellent thermal stability and oxidation resistance. Conductive ceramic material is one of the main raw materials of the vacuum coating conductive evaporation boat.
our Partners
Customer CTS
Customer ERAMET
Partner Magna
Customer INDO-MIM
Partner Knowles Electronics
MARTOR
PARTNER FUZHOU UNIVERSITY
Customer HealthCap
PARTNER TSINGHUA UNIVERSITY
chat now
If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!
   

Online Service